Visipro Rack Protector

Visipro Rack Protector
Visipro Rack Protector1

Protectors easily modified on site to fit around bottom beams

Visipro Rack Protector2

Visipro does not protrude into the safe working clearences of the storage bays.

Visipro Rack Protector3

Use an independent steel guard for end of racks and intersecting gangways

ART NO DESCRIPTION COLOURS STD. PACK
AVA

For Rack Uprights from 70 mm to 83 mm Width 

Fluorescent Yellow 24
AVB

For Rack Uprights from 79 mm to 92 mm Width 

Fluorescent Yellow 24
AVC

For Rack Uprights from 93 mm to 106 mm Width 

Fluorescent Yellow 24
AVD

For Rack Uprights from 70mm to 83mm Width 

Fluorescent Yellow 24

Visipro Velcro Strap

ART NO. AVR

visipro strap

COLOUR : BLACK   SIZE : 560MM Length   STD. PACK : 50 Pcs Per Box

Visipro Clips

ART NO

AVS 32

AVS 38

AVS 46

AVW 47

AVW 53

AVW 60

AVW 66

AVW 71

Description 32 mm Centre 38 mm Centre 46 mm Centre 47 mm Centre 53 mm Centre 60 mm Centre 66 mm Centre 71 mm Centre
Colours RED BLUE BLACK RED BLUE BLACK GREEN ORANGE
Std. Pack 50 50 50 50 50 50 50 50

Features

  • Tough, impact resistant, rounded outer shell.
  • Fluorescent yellow colour.
  • Resilient inner shock absorbing pad.
  • Unique fast snap clips.
  • Flexible and strong.
  • Easily removable.
  • 500mm high standard height.
  • Can be double stacked for 1,000mm high protection.
  • Flexible side wings.
  • Side wings can be cut out on site.
  • No requirement to fix to floor.
  • Outer shell and absorbing pad stable down to -30°C.
  • Alternative fixing method using velcro straps.
  • Tested to FEM 10.2.02 for impact normal to aisle.
  • Four widths of protector (Type A, B, C & D)
  • Worldwide patents pending.
  • Inexpensive.
  • Slim-line design.

Benefits

  • Deflects impact away from upright.
  • High visibility promotes safer operating areas.
  • Spreads and absorbs impact load.
  • Fast and simple snap on installation.
  • Sizes to fit most major pallet racking systems.
  • Quick and easy visual rack inspection.
  • Protection where you need it most.
  • Even greater visibility and upright protection.
  • To protect side of upright.
  • Modify to fit around bottom beam applications.
  • Easy and inexpensive to install. Reduces floor damage.
  • Can be used safely and effectively in a cold store.
  • Use where the snap clip may not be the ideal fixing.
  • Known impact load absorption capability.
  • Protector sizes to suit all rack types.
  • Your guarantee of innovation.
  • Affordable protection for the racking asset.
  • Does not protrude into the safe working clearances of the storage bay.

Installing Visipro to Upright

visipro_new_2
1. Check that clip prong centres match with upright hole centres. Use optional velcro straps if required.
visipro_new_4
2. Fit clips to protector and present protector to face of upright. With most uprights, use two clips, one at the bottom and one at the top. When protector is in position with clips in upright, push down to engage clips in holes.
visipro_new_3
3. To remove, lift protector up around 10mm so clips disengage from holes and pull protector off rack. This will allow easy inspection of rack if it is subjected to impact.
visipro_new_5
4. The protector can also be fitted to uprights using optional Velcro straps.

Download the Catalog!

Click Here